Tuesday, July 24, 2012

Move-In Complete; Blogging to resume tommorow or Wednesday with the H110 vs. 2400 Test Results!

Hello all,

I apologize for the light blogging lately, I have been involved in moving into a new place and have had limited time and internet access. As soon as I have the internet hooked up at my new place tommmorow I will work on getting the results of the H110 vs. 2400 tests put up (Sorry about the long delay Steve!) Again, sorry for the delay and we will be back up and running ASAP!

-Michad

Wednesday, July 11, 2012

New High-Speed Videos From Today's Range Trip Posted!!

Hello All!


New videos from today's range trip have been posted to the YouTube channel. Today was a beautiful day for a range trip. The weather was nice, the temperature was warm and the videos all came out very nice. View them, comment on them, and share them and Michad's Shooting Bench with all your friends! I'll embed a few of the new videos below, but be sure to check out the channel on YouTube because there are many more from today. Enjoy your Wednesday!


-Michad
















Monday, July 9, 2012

Range Trip Wednesday- Glock 23 .40 S&W High-Speed Videos Coming Up!

Hello all,


Range trip scheduled for Wednesday. Should be some new high speed videos being posted for you that day, some covering the .40 S&W Glock 23 and others, be sure to stay tuned. Until then, check out the Mad Aussie shooting the Suppressed AK-47 in slow motion!


-Michad


Tuesday, June 19, 2012

High-Speed Range Video: The .375 H&H Magnum & Suppressed AK-47!

Here are some high speed and standard speed videos from today's range excursion. The .375 was a blast to shoot and the AK-47 with the suppressor was amazingly quiet. Look for reviews on both in the coming months. In the meantime, enjoy!!!


-Michad
























Wednesday, June 13, 2012

The New Smith & Wesson M&P .22 LR Pistol

Hello everyone! Today we will be looking at the new Smith & Wesson M&P Pistol chambered in .22 Long Rifle:

The S&W M&P .22 LR Pistol

The S&W M&P .22 is chambered in .22 Long Rifle caliber and is based upon S&W's highly successful line of M&P service-style automatic pistols.  Primarily intended as a sub-caliber trainer to a larger M&P service pistol, the M&P captures the look and feel of the it's larger caliber brothers, while shooting the relatively inexpensive .22 LR cartridge.


 The M&P 22 is a striker fired pistol just like the larger caliber M&P's.  This is notable, as there really aren't that many .22 LR pistols out there that use the striker-firing mechanism, with most using a conventional hammer firing system or other proprietary method.

All controls are in the same location as the larger-caliber M&P's.

The M&P .22 comes with all the controls in the same exact locations as the larger caliber M&P. This is an important feature, as it allows all the training conducted with the sub-caliber M&P .22 to be transferred over to the larger duty-sized M&P pistol, thereby allowing for inexpensive practice with the same techniques used on the duty gun. One notable difference is that there is NO magazine safety on the M&P .22, where the larger caliber M&P comes with a magazine safety.  Also, on the larger caliber M&P's the manual safety is a factory option, but on the M&P .22 the ambidextrous manual thumb safety is standard.

A thread adaptor is required for attachment of suppressors using a standard 1/2x28 thread pattern.

The folks at S&W also took into account the ever-growing market for sound suppressors and made a threaded barrel standard on the M&P .22. This allows those who have .22 LR suppressors to use those devices with the M&P .22 pistol very easily.  The threads on the M&P .22 are NOT your standard 1/2x28 thread pattern; therefore, a thread adaptor is required for the use of a suppressor using the standard thread pattern.

The M&P with suppressor attached.

One more thing worth mentioning when using a sound suppressor with the M&P .22 is that most .22 LR suppressors will allow for the use of the standard sights on the M&P .22.  Typically, a special tall front sight blade is needed to allow for the use of iron sights with suppressors. In the case of the M&P .22 with the .22 LR suppressor, the sights are easily visible with the suppressor attached to the pistol.

Unlike some guns, even when the suppressor is attached, the standard iron sights can still be used.

 In roughly 150 rounds fired with the M&P .22 both suppressed and unsuppressed, the pistol has been utterly reliable. With the suppressor attached and the proper ammunition loaded in the gun, the report is minimal, similar to a loud cough.  The only real negative thing I can find with the gun is that the trigger is really quite heavy and has a spongy feel to it.  However, this was not too detrimental to accuracy, and you may find the trigger will feel fine to you. Purely a personal thing.


All in all, the Smith & Wesson M&P .22 LR pistol is a fine handgun.  It is extremely useful for inexpensive practice with a pistol almost identical to the full size M&P line of handguns, but would also serve as a fun plinking handgun. Smith & Wesson has hit a home run with this .22 LR pistol, and hopefully their innovation continues to put out more products like this one.

-Michad



Change Of Plans-Range Trip Postponed Due To Rain

Unfortunately, the range trip scheduled for today to test out the .375 H&H Magnum has been postponed due to the rain drenching the area.  However, I was able to get some pictures of a few new .22 LR pistols that have recently hit the market and will be posting articles on those shortly.

Enjoy the rainy weather!

-Michad

Tuesday, June 12, 2012

Range Trip Tommorow - Berry's Bullets & High-Speed Video of the .375 H&H Magnum to follow

Well it's that time of the week for a range visit. Will be making a jaunt down to the range to test out some new pistol loads using some new 125 grain Berry's Plated Bullets I picked up for the .357 Magnum and .38 Special:

Two .38/.357 Bullets; on the left, a 125 grain Berry's Plated Flat Point Bullet. On the right, a 158 grain Hornady XTP Jacketed Hollowpoint.
 Berry's Plated Bullets offer the best of both worlds when it comes to cost and performance.  For those people who don't wish to shoot pure cast lead bullets in their reloads but don't want to pay the higher cost of conventional jacketed bullets, plated bullets represent a good compromise.

Berry's offers bullets for most applications. Here is the 125 grain .38/.357 bullet and the 115 grain 9mm Round Nose Bullet
I have used the Berry's 115 grain 9mm bullets extensively in my 9mm handloads, and have experienced great results and great accuracy.  Just use lead bullet load data as the Berry's website suggests, and you should experience the same great results. I will be sure to report back on the performance of the 125 grain bullets after testing tomorrow.

Also, tomorrow will be the first time that the Mad Aussie and myself get to test out his Winchester Model 70 in .375 Holland & Holland Magnum:




The .375 H&H Magnum is typically considered the absolute minimum acceptable caliber when hunting dangerous game animals in Africa.  Some African countries even require by law that at least a .375 caliber and above cartridge be used.  It should be an interesting experience to say the least, and I will be sure to take some high-speed video of it being shot, along with some other firearms.

Stay Tuned.

-Michad

Tuesday, June 5, 2012

The Ruger LCP and the .380 ACP

This entry of Firearm Reviews focuses on the diminutive Ruger LCP chambered for the .380 ACP cartridge:
The Ruger LCP (Lightweight Compact Pistol) in .380 ACP
The Ruger LCP is a .380 ACP pistol primarily designed for the burgeoning concealed carry (CCW) market.  In the past few years, the number of concealed carry permit holders has skyrocketed, due in part to an increase in violent crimes, mostly involving drugs.  More and more law-abiding individuals are making the decision to be responsible for their own personal safety, realizing that Law Enforcement is not always present to protect them.  For those people who have chosen to carry a firearm for personal protection, training and familiarity with firearms is paramount, as is the size of the firearm.  The Ruger LCP fits the bill for CCW holders, combining exemplary performance with small, concealable size.

The Ruger LCP above a S&W Model 60 J-Frame in .38 Special. Notice the size difference
The Ruger LCP is chambered in the .380 ACP cartridge, which used to be considered barely adequate for defensive purposes.  With the advances in technology in regards to ammunition manufacture, the .380 ACP is now considered an adequate defensive round when chambered in a reliable pistol such as the LCP.


The new breed of .380 ACP ammunition is vastly superior to the offerings of the past.
Notice the wound track and depth of penetration in the ballistics gelatin. Plenty adequate for defensive use.
The LCP uses the tilt-locking system of operation, rather than the commonly used straight blowback system found on most small .380 ACP pistols.  This means that there is no need for an excessively strong recoil spring to achieve breech locking. Thus, the slide on the LCP can be easily retracted and is not as difficult as retracting the slide on a straight blowback pistol.  This can be a decided advantage for those users who may have limited hand strength and may experience difficulty in retracting the slide on a blowback .380 pistol.

View of the Barrel Hood area showing the caliber stamping and the Glock-style extractor
Right hand side view with the slide retracted showing the tilting-barrel locking arrangement
Front view of the LCP showing another angle of the tilt-barrel arrangement. Note the flared end to assist in locking.
The LCP, unlike many small pistols, is a hammer fired pistol.  There is no pre-cocked striker arrangement as is normal on many small .380 ACP pistols.  The flush-fitting snag-free hammer cannot be thumb-cocked manually, but is pre-cocked when the slide is retracted to chamber a round, and is subsequently re-cocked as the slide cycles during operation.  Because of this, the LCP does not feature a double strike capability.  Therefore, in the event of a stubborn primer or a misfire, the recalcitrant round must be cleared from the pistol, rather than just simply pulling the trigger again for a second try at firing.

View of the LCP's hammer when not pre-cocked. A trigger pull right now would do nothing.
View of the LCP's hammer after being pre-cocked by cycling the slide. The pistol is now ready to fire.
The LCP has very small sights, which are quite difficult to use.  However, in my opinion, this is a minor concern, as this is not a target or plinking pistol.  It is designed for up-close personal defense, generally not beyond 7 yards. At that distance, the sights are more than adequate for defensive encounters, and serve their intended purpose.

Top view of the LCP's minimalist sighting arrangement. Perfectly adequate for their intended purpose, however.
The Ruger LCP .380 ACP: A Fine Defensive Choice
In truth, the Ruger LCP is a fantastic firearm.  It provides reliability and performance in a concealable package.  Yes, the .380 ACP is still not the biggest round out there, but it is the one to be most likely carried.  When people are inconvenienced by carrying a large firearm for protection, they don't end up carrying it.  Something like the Ruger LCP that is very reliable and portable is far more likely to be carried than a large .45 ACP 1911 pistol or something similar.  As the people who carry these little guns like to say "a .380 in the hand is better than the .45 at home". I tend to agree with them.

-Michad







Saturday, May 19, 2012

Entertainment Break

Here's a little video to keep you entertained while I reformat the review of the M&P 22. This video should be titled "How Not To Shoot A Gun". Enjoy!






-Michad

Monday, May 14, 2012

New High Speed Videos From Today's Range Trip

To keep everyone entertained until a review of the M&P .22 Pistol is posted, here are some high speed videos from the range today. Enjoy!!











\





-Michad

Sunday, May 13, 2012

Range Trip Tommorow; Will Have Plenty Of Articles This Coming Week

Hey everyone,


I've got a range trip scheduled tommorow morning, so I figured I'd hold off on the posting for today, as I'd like to gather more videos and information tommorow while there. Look for some new articles tommorow night and also stay tuned for two upcoming reviews of the Smith and Wesson M&P 22 Pistol and the Ruger SR-22 Pistol in the coming week!


Enjoy the video from Gunblast.com!


-Michad


Friday, May 11, 2012

Gunblast Video Review of the Ruger LCR-22

As it is friday, posting will be light today, sorry everyone. To keep you held over until the next article, here's a video review from Gunblast of the new Ruger LCR-22 Revolver in .22 LR, enjoy!






-Michad

Tuesday, May 8, 2012

Suppressing A Revolver? It can be done!

In fact, you CAN suppress a revolver, as long as you use the 1895 Nagant that seals the gap between the cylinder and barrel to prevent gases from escaping!:






-Michad

Sunday, May 6, 2012

The North American Arms Sidewinder .22 LR

I saw something that really piqued my interest when reading about the 2012 NRA Show & Exhibit. North American Arms, a maker of fine deep-cover .22 LR single-action revolvers is coming out with a swing-out cylinder model in .22 Magnum, the first full-production design by NAA that doesn't require the cylinder pin to be removed for reloading:
 
The New NAA Sidewinder .22 Magnum
I have one of NAA's Mini-Revolvers in .22 LR and it is a superb pistol for its intended purpose. It's not a long range target pistol, but for deep-concealment and plinking fun, its a great, well-made revolver for the value:
My NAA Mini-Revolver in .22 LR Next to a 9mm Parabellum Cartridge and a Quarter to show the size
 Look for a full review of the NAA Mini-Revolver in the coming weeks!

-Michad

Saturday, May 5, 2012

High Speed Video using the Nikon S9100

I discovered today that my mother's new camera takes High Speed HD video at a maximum of 240 frames per second. To test it out, I set up the tripod and lamp and used the timer function to capture me performing a reload of my Sig-Sauer P226 (all ammo locked up, none anywhere near me. Safety first and always!). Here's what it looks like:





I can't wait to take this thing to the range and see what it can do for high-speed filming of the gun in action. Stay tuned.


-Michad

Great Firearms: The Heckler & Koch MP5-SD Suppressed 9mm

In the world of military and law enforcement operations, the submachine gun has a special place in the hearts of operators.  A compact, reliable weapon firing pistol caliber ammunition at a high-cyclic rate is exceedingly useful for their types of close-quarter, in-your-face combat that they experience in their day-to-day training and deployment.  While there are numerous designs of submachine gun, there is one design that stands out above all others and has stood the test of time.  That is the Heckler and Koch MP5. 

The MP-5 SD 9mm
The H&K MP5 (which stands for machinenpistole 5 or “machine pistol model 5”) is a selective-fire delayed blowback submachine gun which utilizes the NATO standard 9mm Parabellum pistol cartridge.  Developed in 1964 and released to the German Federal Police in 1966, it quickly became the most widely used submachine gun by the worlds counter terrorist and special operations forces as well as those countries in the newly formed NATO alliance.  It used plentiful 9mm Parabellum ammunition, and was very controllable, even on fully automatic.  This use of common ammunition simplified logistics and the performance of the weapon allowed for a high level of precision for the tactical operators that used them. 

Design Specs for the Roller Locking Mechanism from the U.S. Patent Office
The MP5 uses a type of delayed blowback system as its operating mechanism.  This system, pioneered in the dark days of the Nazi regime in World War Two, utilizes two rollers attached to the bolt carrier inside of the weapon.  Firing from a closed bolt, the rollers on either side of the bolt carrier fit into recesses in the chamber of the weapon, delaying the opening of the bolt and extraction of the spent cartridge until the bullet has left the barrel and the pressures inside the chamber have dropped to a safe level.  The MP5 also utilized a fluted chamber, with shallow flutes inside the chamber that allowed gasses to “lubricate” the cartridge case and prevent it from expanding and sticking to the chamber walls.  These two systems were carried over from H&K’s extremely successful and reliable 7.62x51mm rifle, the G3.  These two systems greatly contributed to the reliability of the weapon and helped to ensure its place in the hands of military forces around the globe.


Standard MP-5 in Unsuppressed Configuration
In 1974, H&K designed a integrally suppressed variant of the MP5, called the MP5-SD.  It utilized a large suppressor that slipped over almost the entire length of the barrel.  Just forward of the threading that the suppressor used to attach itself to the receiver, are 30 gas ports.  These ports are designed to release the propellant gasses into the suppressor, which serves two functions; first, it slows the acceleration of the bullet to subsonic velocity, thereby decreasing or eliminating the supersonic crack of the bullet downrange. Secondly, it allows the gasses escaping the firearm to slow to a subsonic level so they do not produce the characteristic crack of a gunshot when the bullet exits the barrel.  When combined, these ports and suppressor result in a very mild report, one that sounds remarkably like a loud cough.



My experiences with the MP5-SD have been extremely positive.  My shooting buddy has a semi-automatic variant with collapsible stock in 9mm Parabellum caliber and it is an extremely effective weapon out to 100 yards.  The report is very mild, and hearing protection is optional when firing the MP5-SD.  While the suppressor is designed to reduce normal supersonic ammunition to subsonic velocities, I’ve found that the suppressor works best when using 147 grain subsonic 9x19mm ammunition. The only caveat I have found is to not use +P ammunition in the MP-5, as the higher pressure 9mm +P ammo will cause the bolt to open before chamber pressures have dropped to a safe level, thereby risking damage to the firearm and/or shooter.


The MP5-SD is truly an iconic submachine gun, and the MP5 and its variants have figured in thousands of special operations performed by the world’s militaries.  In my limited experience, I have found the reputation of the MP5 to be well deserved as it is a reliable and well-designed weapons system that will perform well and be around for years to come.

Wednesday, May 2, 2012

Shooting The MP5-SD Suppressed 9mm

Here's a video of me shooting the MP5-SD Suppressed 9mm:





Look for an article in the coming weeks covering the history and my experiences with this great sub-machine gun!
-Michad

Monday, April 30, 2012

Hollywood Firearms: Ever wonder what gun was in that movie or TV show?

A while ago I stumbled upon a website that is pretty interesting. It's called the Internet Movie Firearms Database, and it covers nearly every movie, TV show and video game ever made.  Just type in whatever title you're looking for and it will come up with the firearms used in a movie and who used them, along with screenshots from the movie.  It's a great reference if you are curious about a firearm used in a movie.

Check it out at Internet Movie Firearms Database

-Michad